ACS-LF32 is used for elevator control.
It supports 2 card readers, card readers with multiple protocols and biometric systems, the card reader interface adopts RS485 two-way encrypted transmission; supports Chinese and English voice prompts and biometric card readers such as veins, iris, and fingerprints.
It provides 32 sets of relay outputs, which can be extended to control up to 72 sets of relay outputs by connecting to ACS-LF32/EXP through EXP BUS.
It can initiate communication actively. When the network controller and the computer system are offline or fail, it can execute the fire linkage signal normally and open the fire evacuation door or all doors.
Various user-configured system parameters such as the cardholder’s access rights, access records, and access modes are stored in the non-volatile memory chip. Even if the communication with the host is interrupted, the controller still works normally.
No need to add hardware equipment, no need to customize software, no need for server and other host computer support, it can carry out bus linkage with any controller of S6000 system.
The data is automatically stored when the power is off, and the data is not lost when the power is off.
Fixed installation of elevator roof screws
Parameter Table
| Model | ACS-LF32 |
| Size | 380 x 300 x 100 mm |
| Communication port | 2 sets of CAN industrial BUS, 1 set of expansion port |
| Reader standard | Card reader, fingerprint, palm, iris and other input devices that comply with Wiegand 26/RS485 protocol. |
| Number of readers | 2 |
| Local port | 2 groups of dry contact inputs, 32 groups of relay outputs, can be connected to ACS-LF32/EXP to expand control to 72 circuits |
| Installation method | Fixed installation of elevator roof screws |
| Working environment | -20～60℃，0～90%RH |
| Storage environment | -40～85℃，0～90%RH |
Article number：
ACS-LF32: 8801-00000035
ACS-LF32/EXP: 8801-00000036